If you want to keep your car safe, make sure your vehicle’s windshield is strong enough. The windshield helps ensure the integrity of your car. However, as time passes, the windshield struggles with inclement weather and other elements. Sometimes windshields break. If this is the case for you, we suggest you have it replaced or repaired.

Types of cracks in the windshield of a car

These cracks are of many types. Based on the objects hitting the car, below are the most common types.

potato chips: When your windshield comes into contact with a small object or cracks, the glass can lose a small chip or piece. Over time, these chips tend to spread out and evolve over a larger area.

edge crack: These cracks occur along the edge of the windshield. Often when this area is hit by something hard, it causes meandering cracks. As a result, you have to replace everything.

stress crack: As the name suggests, this type of crack occurs when the glass is under high stress due to heat.

Should you hire a professional or do it yourself?

Let us first answer this important question. Generally, if the size of the chip, break, or crack on your windshield is less than 6 inches, it can be repaired. But if the crack is bigger than that, you may need to replace the entire windshield.

Ideally, you may want to get the chip repaired as soon as possible. If there is an underdeveloped chip, you can use an adhesive kit to fill in the chip. The idea is to remove air from the inner layer and then seal the point of impact.

This is how a professional performs windshield replacements

There are several steps you need to take to remove and replace your car windshield. So it may not be a good idea to do the repair yourself. Below is how a professional does the job.

Step 1: First of all, you need to cover the interior and exterior to ensure that it is protected from the small pieces of glass that can fall from the broken windshield.

Step 2: Now, you may want to remove the windshield perimeter trim.

Step 3: Take the appropriate tool to disconnect the windshield from the area where it is welded to the car. All you need to do is use the tool to cut it apart.

Step 4: In this step, you need to remove the glass by lifting it up and pushing it from the inside. You can get a helping hand to do it.

Step #5: Go through a couple of priming steps to make sure the frame sticks to the new windshield.

Step #6: Once installed, you can let the windshield adjust according to the manufacturer’s guidelines.

conclusion

So, if your windshield is cracked, make sure you have it repaired as soon as possible. However, if the problem is too serious, you may want to contact a technician to do the work for you.