Today, you can find dozens of bras all over the world. If you want to know about all of them, it will take you a lot of time. The reason is that each screw fastener is designed to serve a specific purpose or multiple purposes. If you are shopping for bras for the first time, we suggest you avoid some common mistakes listed in this article. Keep reading to know more.

1. Choosing the wrong grade and material

Before you buy a bra, be sure to consider the grade and material. Each type of material comes with its own set of features. Depending on the application, you need to choose the right material, as each material has its own chemical composition called material grades. For example, stainless steel is corrosion resistant and grade type 316 is corrosion resistant in an environment that has extreme salt water.

2. Mix wrong materials

When certain metals are put together, the process can negatively affect their integrity. For example, when you combine stainless steel, aluminum, and an electrolyte like salt water, this electron transfer process can cause instability.

And this can make the materials weaker and more prone to corrosion. And this process is called galvanic corrosion. Therefore, increasing the life of the fastener should be avoided.

3. Using the wrong locking fasteners

Although locking bras are a great addition to all kinds of bra sets, some situations really do call for them. For example, if an assembly is exposed to adverse conditions such as vibration, locking fasteners may be an ideal solution.

If you want to achieve great results, we suggest you go for a faster one that has a nylon strap. Since the nut is attached to the bolt, the threads tend to cut through the tough, high-quality nylon. And this adds more friction to the assembly of the system.

4.Force the connection

There is a big difference between the different bras. It is not a good idea to put together different types of bras. All types of fasteners are easy to thread manually. Therefore, if you find that it is not seated properly, you should check the fastener with the appropriate type of tool. Do not force the connection unless you have checked the size.

If you have no idea about the type of threading required, you may want to consult a professional first.

5. Choosing the wrong drivers

Basically, the function of a drive is to fit into the driver slot faster. Drivers come in various sizes. Therefore, it is important to ensure that you choose the correct driver, as a loose one can cause problems.

Apart from this, the correct unit for dice and keys must be chosen. Some people go for a metric socket as it is the closest match, which is not a good idea. The reason is that the break cannot be a close game. If there is too much torque, the points will warp and you will have a bald head.